Binks Spray Guns 2017-10-09T22:08:21+00:00

Binks Spray GunsBinks-Logo

Midway offers the full line of Binks paint spray guns, including:

Binks Air Spray (Conventional) – Paint Spray Guns

Trophy Full Size CONV NoCup 3-4 Rt

Binks Trophy Air Spray Gun

The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. They’re designed with an emphasis on ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality with a wide variety of materials.

  • Sizes – Full Size and Touch UpBinks-Logo3
  • Spray Technologies – HVLP, LVMP (Compliant), Conventional
  • Fluid Nozzles and Needle set-ups – Tuff Tip Hardened Stainless Steel Nozzles, Tungsten Carbide, Plastic Tip Needles, and feathering needles
  • Available in Pressure Feed, Gravity Feed, and Siphon Feed

A conventional spray gun. Corrosion resistant SS fluid passages, Ergonomic handle, with new MAXIMUM DELIVERY air nozzles. With the largest selection of air and fluid nozzles in the industry behind it, the Model 2100 will spray all conventional coatings, including high solids.

Binks 2100 Air Spray GunBinks-Logo3
  • Corrosion resistant stainless steel fluid passages designed for waterborne materials
  • Curved, ergonomic handle reduces fatigue
  • Integrated head has fewer parts for quick repair
  • Stainless steel threads won’t cross-thread, increasing life.
  • High trigger pivot point increases fluid flow capability
  • Large pattern sizes increase production rates
  • Cheater valve adjusts air at the gun, saving operator time
  • “Maximum Delivery” air nozzles have better atomization for greater product finish with less material
  • Replaces the Binks 2001 air spray gun

SV100

Binks SV100 Air Spray Gun

Features a fluid control knob that allows precise delivery of materials such as epoxies, nitro lacquer, wash primers and more.

  • Ergonomically designed for comfort and controlBinks-Logo3
  • Easy-pull trigger with feathering capability

Binks HVLP – Paint Spray Guns

Trophy Full Size HVLP 3-4 rt

Binks Trophy HVLP Spray Gun

The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. They’re designed with an emphasis on ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality with a wide variety of materials.

  • Sizes – Full Size and Touch UpBinks-Logo3
  • Spray Technologies – HVLP, LVMP (Compliant), Conventional
  • Fluid Nozzles and Needle set-ups – Tuff Tip Hardened Stainless Steel Nozzles, Tungsten Carbide, Plastic Tip Needles, and feathering needles
  • Available in Pressure Feed, Gravity Feed, and Siphon Feed

tMachhvlp

Binks Mach 1 HVLP Spray Gun

The MACH 1 is a full size HVLP spray gun with special nozzles and modifications that allow it to operate high transfer efficiencies in compliance with air quality management regulations.

Constructed of a lightweight drop-forged aluminum body and stainless steel fluid passages, including long life self-adjusting packings, this spray gun is designed to stand up under hard, continuous use. It operates like a conventional spray system utilizing compressed shop air.

Binks-Logo3

tM1-G

Binks M1-G HVLP Spray Gun

The M1-G HVLP gravity feed spray gun not only complies with all air quality regulations, but also will atomize and spray as quickly as a conventional air spray gun. An innovative low volume air nozzle designed specifically for automotive OEM and industrial use allows the M1-G to spray basecoats, clear coats, waterbornes, and high solids at fast application speeds with material savings of up to 50%.

This comfortably light, superbly balanced spray gun is easy-to-operate and smooth to trigger with only 18 lbs. of inlet pressure required. M1-G employs a unique long lasting self-adjusting cartridge packing for simple replacement.

Binks-Logo3

tMach_1_SL

Binks Mach 1SL HVLP Spray Gun

The MACH 1SL HVLP is a lightweight, top quality, high performance spray gun. The superbly balanced forged aluminum body is ergonomically designed with a compact grip size, offering the operator extra comfort and control.

All of the spray gun’s components are machined and finished to exacting tolerances using only the highest quality materials, including long life self-adjusting packings to ensure years of peak efficiency.

Binks-Logo3

Binks Compliant – Paint Spray Guns

Trophy Full Size LVMP NoTank 3-4 rt

Binks Trophy Compliant (LVMP) Spray Gun

The Binks Trophy Series Spray Guns are designed to provide superior finishes in the industrial marketplace. They’re designed with an emphasis on ergonomics and optimized air flow through the guns to improve atomization for maximum transfer efficiency and finish quality with a wide variety of materials.

  • Sizes – Full Size and Touch UpBinks-Logo3
  • Spray Technologies – HVLP, LVMP (Compliant), Conventional
  • Fluid Nozzles and Needle set-ups – Tuff Tip Hardened Stainless Steel Nozzles, Tungsten Carbide, Plastic Tip Needles, and feathering needles
  • Available in Pressure Feed, Gravity Feed, and Siphon Feed

Binks Airless and Air-Assisted-Airless – Paint Spray Guns

tBinks_AA1600

Binks AA1600 Air-Assisted-Airless Spray Gun

The AA1600 improves fan pattern adjustment for hard-to-reach areas and reduces build-up of acid catalyzed coatings. These features are particularly beneficial in the wood finishing industries, such as cabinet shops and furniture manufacturers, where recessed and hard-to-reach spaces require special attention to attain an even and thorough finish.

  • Fluid Passages : Stainless SteelBinks-Logo3
  • Fluid Inlets: ¼” NPS (m)
  • Max. Pressure: 1600 PSI / 110 Bar
  • Air Inlet: 1/4″ NPS (M) or 3/8″ O.D. Tube
  • Weight: 17.28 oz. / 490g
  • Construction :Drop-Forged Aluminum
  • Replaces the Binks AA1500 

BK_0909-4400M Gun_LR.jpg

Binks AA4400 Air-Assisted-Airless Spray Gun

The AA4400M improves fan pattern adjustment for hard-to-reach areas and reduces build-up of acid catalyzed coatings. The tungsten carbide seat works great for high viscosity fluids and heavy industrial applications. These features are particularly beneficial in the wood finishing industries, such as cabinet shops and furniture manufacturers, where recessed and hard-to-reach spaces require special attention to attain an even and thorough finish.

  • Fluid Passages : Stainless Steel / Tungsten CarbideBinks-Logo3
  • Fluid Inlets: ¼” NPS (m)
  • Max. Pressure: 4400 PSI / 303 Bar
  • Air Inlet: 1/4″ NPS
  • Weight: 17.42 oz. / 494g
  • Construction: Drop-Forged Aluminum
  • Replaces the Binks AA4000

tBinks_Pitbull_3500

Binks PitBull 3500 Airless Spray Gun

The PitBull 3500 PSI Airless spray gun has a revolutionary design that eliminates the needle and spring valve and is replaced by a single piece spray valve. Wear parts in the spray valve are made of Tungsten Carbide. Spray valve design reduces spitting, trigger pull, and fatigue while lasting up to twice as long as guns with needles.

  • Fluid Passages : Tungsten CarbideBinks-Logo3
  • Fluid Inlets: ¼” NPS (m)
  • Max. Pressure: 3500 PSI/2415 Bar
  • Weight: 20.5 oz.
  • Construction :Drop-Forged Aluminum

tBinks_Pitbull_7500

Binks PitBull 7500 Airless Spray Gun

The PitBull 7500 PSI Airless spray gun has a revolutionary design that eliminates the needle and spring valve and is replaced by a single piece spray valve. Wear parts in the spray valve are made of Tungsten Carbide. Spray valve design reduces spitting, trigger pull, and fatigue while lasting up to twice as long as guns with needles.

  • Fluid Passages :Stainless SteelBinks-Logo3
  • Fluid Inlets: ¼” NPS (m)
  • Max. Pressure: 7500 PSI/517 Bar
  • Weight: 20.5 oz.
  • Construction :Drop-Forged Aluminum

tAirless1

Binks Airless 1 High Pressure Spray Gun

The Airless 1 is a lightweight, drop-forged, manual spray gun used for applying various maintenance and decorative finishes. It features a stainless steel head and fluid passages, ball-type fluid valve, removable valve assembly, tungsten carbide seat and built-in diffuser. The thumb-operated safety trigger lock permits one hand locking, unlocking and triggering. A tip guard is included for added safety.

  • Fluid Passages: Stainless SteelBinks-Logo3
  • Max. Pressure: 6000 PSI
  • Construction: Drop-Forged Aluminum
  • Colors: Navy